Accessories – MMPI CI https://mmpi-ci.com Une Référence Internationale Wed, 23 Jun 2021 03:12:27 +0000 en-GB hourly 1 https://mmpi-ci.com/wp-content/uploads/2019/02/cropped-FAV-Icon-MMPI-CI-32x32.jpg Accessories – MMPI CI https://mmpi-ci.com 32 32 YSI – 6561 pH Sensor https://mmpi-ci.com/en/produit/ysi-6561-ph-sensor/ Wed, 23 Jun 2021 03:12:27 +0000 https://mmpi-ci.com/?post_type=product&p=20043 Simple, accurate pH measurement in sensors designed for minimal maintenance in sampling, profiling, and long-term monitoring applications.

FEATURES

  • Produces very stable readings.
  • Rugged and guarded.

LIMITATIONS

  • Not wipeable; not ideal for high-fouling environments.

Sensor is available for use on the following sondes:

  • 600XL & 600XLM and 600XL & 600XLM V2
  • 600DW & 6920DW
  • 6820 V2 & 6920 V2
  • 6600 V2 & 6600EDS V2

REMARKS : This sensor must be installed into a 6-Series sonde to function. Does not function on its own.

]]> DUPLOMATIC – HC2 – HCK2 https://mmpi-ci.com/en/produit/duplomatic-hc2-hck2-hydraulic-cylinder/ Wed, 16 Jun 2021 02:48:42 +0000 https://mmpi-ci.com/?post_type=product&p=20024 Double acting cylinders constructed in compliance with ISO 6020-2 and DIN 24554.

The compact design of the square ends with tie rods plus the high quality material and seals render these cylinders highly reliable and therefore strongly recommended for all types of industrial applications.

ATEX 2014/34/EU rated version for installation in potentially explosive atmospheres is now available. The standard version of cylinders is ATEX II 2GD classified, whereas cylinders with proximity sensors are ATEX II 3GD classified. The declaration of conformity to the up mentioned standards is always supplied with the cylinder

]]> GRUNDFOS – AMD.05 – 08 https://mmpi-ci.com/en/produit/grundfos-amd-05-08/ Thu, 03 Jun 2021 03:45:00 +0000 https://mmpi-ci.com/?post_type=product&p=19750 Mixers and flowmakers – AMD

Submersible, direct driven AMD mixers are designed for mixing of low/medium viscosity liquids in small tanks and pumping stations. These mixers are used to flush the solids down, maintaining the suspension of solids. In short, replacing the convetional flush valve. It has ranges of AMD.05 to AMD.08.

FEATURES

  • Motor housing is made of stainless steel
  • Propeller is made of highly wear-resistant polyamide and it is self-cleaning

APPLICATIONS

  • Industrial wastewater treatment & reuse
]]> CITEC – 7870B dry – 7970B filled Series https://mmpi-ci.com/en/produit/7870b-dry-7970b-filled-series/ Mon, 10 May 2021 03:02:58 +0000 https://mmpi-ci.com/?post_type=product&p=19000 Stainless Steel 7870B-7970B Pressure Gauge Series are designed for chemical, petrochemical, pharmaceutical, food industries.

DESCRIPTION

  • Pressure Range :-1 to 1000 bar
  • Accuracy class : 1 for ∅ 100 et 150, 1.6 for ∅ 63
  • Protection : IP65
  • Filling liquid : Glycerin
]]> CITEC – Series BF BRF BUSF https://mmpi-ci.com/en/produit/diaphragm-seals-series-bf-brf-busf/ Tue, 04 May 2021 08:05:49 +0000 https://mmpi-ci.com/?post_type=product&p=18837 Diaphragm seals, flange connection, with internal or flush diphragm, CITEC BF-BRF-BUSF Series, are designed for chemical and petrochemical industries on aggressive, viscous or hot media.

According to standards :

  • EN1092-1 (ISO), B1 facing type
  • ASME B 16.5 (ANSI), RF facing type DN15 (1/2’’) to DN100 (4’’)

The three BF, BRF, BUSF Series allow to answer to different diameters DN15 (1/2’’) to DN100 (4’’) and to different materials used for diaphragm.

]]> KSB – Amamix https://mmpi-ci.com/en/produit/amamix/ Tue, 04 May 2021 06:40:50 +0000 https://mmpi-ci.com/?post_type=product&p=18833 Horizontal submersible mixer with self-cleaning ECB propeller, close-coupled design, direct drive. ATEX-compliant version available.

Main applications

  • Advanced treatment / 3.stage
  • Bio. treatment / 2.stage
  • Tank cleaning
  • Waste water

Design

Horizontal submersible mixer with self-cleaning ECB propeller, close-coupled design, direct drive. ATEX-compliant version available.

Application

Handling municipal and industrial waste water and sludges in environmental engineering (also in biogas plants).

]]>