Use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely hygienic operations. The H-FLO pump delivers high suction vacuum and high discharge pressure that allow it to self-prime and fully strip lines, a critical consideration when maximizing product recovery. The seal-less eccentric disc transfer solution for hygienic applications requiring high flow rates — up to 65 m³/h (286 gpm), 10 bar (145 psi).

FEATURES

• Provides consistent and efficient flow with a wide range of viscosities
• Flow rate up to 65 m³/h (286 gpm), 10 bar (145 psi)
• Extremely gentle, pulse-free flow to protect shear-sensitive products
• Reduced maintenance with no mechanical seals or timing gears
• Clean in place (CIP) and sterilize in place (SIP) for the ultimate in convenience and cleanliness

APPLICATIONS

Unique seal-less design with stainless-steel bellows that ensures durability, safety and product containment. Very high suction and discharge pressures that allow it to self-prime and fully strip lines, a critical consideration when maximizing product recovery. A solution for continuous dosing with low flow rate (below 800 l/h / 3.5 GPM).

FEATURES

• Leak-free pumping without the need for magnetic couplings or mechanical seals
• Excellent self-priming
• Dry running
• Small footprint and easy integration
• Low shear rate
• Outstanding volumetric efficiency
• Pumped product constantly renewed
• Ability to pump low and high viscosity products
• Output not affected by viscosity variation
• Low linear speed
• Easy cleaning (no retention zone)
• Constant performance over time

APPLICATIONS

designed for transferring sensitive products. These self-priming pumps feature quick and easy hand cleaning as well as clean-in-place (CIP) capabilities, critical considerations for hygienic applications. A solution for sanitary applications with cleaning out of place (C.O.P), requiring quick and easy dismantling (up to 12 m³/h / 52 GPM).

FEATURES

• Leak-free pumping without the need for magnetic couplings or mechanical seals
• Self-priming with strong suction power
• Ability to drain piping (inlet and outlet)
• Dry running up to five minutes
• Low shear rate
• Constant performance over time
• Outstanding volumetric efficiency
• Pumped product constantly renewed
• Ability to pump low and high viscosity products
• Output not affected by viscosity variation
• Low linear speed
• Low pulsation effect

APPLICATIONS

• Excellent self-priming ability
• No non-return valve required in the inlet
• Single unbalanced/balanced seals to EN 12756 (DIN 24960)
• Mechanical seal with dry-running protection through oil bath quench
• Ideal for handling contaminated liquids
• Easy maintenance Back-Pull-Out principle
• Flanges 32 and 40 threaded connection
• Flange connection 50 and higher to ISO 7005 PN 16
• Flange connection to ISO 7005 PN 20 (ANSI B16.5 150 lbs) optional
• Greased for life roller bearings
• Magnetic drive optional
• Atex Certified
• CE Certified

Suitable for contaminated liquids, as well liquids containing air or gas, for sumps, gullies and many other applications where a suction lift is required

DESCRIPTION

• Available in cast iron or stainless steel
• High-pressure/long-haul pumping
• Inspection cover available
• Interchangeable components
• Gentle pumping action

APPLICATIONS